CE313_4_Archi_Code_Lec (2)

Total Open Space within Lot.

It regulates the design, construction, and occupancy of buildings.

The area left on the lot minus the setbacks.

Percentage of Site Occupancy.

Building safety, accessibility, and environmental sustainability.

Total Open Space within Lot.

Building Height Limit.

To regulate the maximum height of buildings/structures based on their proposed use or occupancy.

At the ground floor/grade level.

The Allowable Maximum Building Footprint (AMBF).

Percentage of Site Occupancy.

From the established grade line to the topmost portion of the proposed building.

Gross floor area (GFA), enclosed support areas, and all usable horizontal areas attached to the building.

From the outermost face of the exterior walls of the proposed building/structure.

Total Open Space within Lot.

At least 150 kg per sq.m.

Maximum Allowable Construction Area.

To establish standards and guidelines for architectural practice in the Philippines.

To establish standards and guidelines for architectural practice in the Philippines.

Total floor space within the perimeter of the permanent external building walls, including office areas, residential areas, corridors, lobbies, and mezzanine levels.

Building safety, accessibility, and environmental considerations.

The National Building Code and local government units.

It guides the development and zoning of urban areas.

3, 5, 12, 18, and 30 (representing the number of storeys/floors).

Every dwelling must have at least one sanitary toilet and adequate washing and drainage facilities.

Rule VII and VIII.

It determines the amount of open space required within a lot.

It regulates the design, construction, and occupancy of buildings.

The National Building Code and local government units.

Building regulations, zoning laws, and design standards.

1. Based on Rule VIII Table VIII.1 [PSO], 2. Based on Rule VIII Tables VIII.2 and VIII.3 [setbacks, yards, and courts], 3. Based on applicable stipulations of the Fire Code.

TOSL = ISA + USA, expressed as a percentage of the Total Lot Area (TLA).

As a percentage of the Total Lot Area (TLA).

Stairs must be at least 750 mm in clear width, with a rise of 200 mm and a minimum run of 200 mm.

Total Open Space within Lot.

It is a quantity related to the Allowable Maximum Building Footprint.

AMBF = x (Total Lot Area).

Rule VII and VIII.

Covered areas used for parking, driveways, services, and utilities.

The percentage of the maximum allowable floor area of paved, tiled, or hardscaped surfaces at ground level outside the main building.

Building safety, accessibility, and environmental sustainability.

Rule VII and VIII of the IRR of the NBCP.

The Unpaved Surface Area (USA).

Total Gross Floor Area.

Total Open Space within Lot.

Allowable Maximum Building Footprint.

To establish standards and guidelines for architectural practice in the Philippines.

To establish standards and regulations for architectural practice in the Philippines.

The total area of the lot or property on which a building stands.

Rule VII and VIII of the IRR of the NBCP.

The development potential and/or the carrying capacity of all lots and proposed developments.

MACA = PSO + ISA, expressed as a percentage of the total Lot Area (TLA).

The requirements of the Philippine Electrical Code.

After the application of other development controls and certain parameters.

The percentage of the maximum allowable enclosed floor area of any building at the ground floor in relation to the Total Lot Area.

It regulates the design, construction, and occupancy of buildings.

Allowable Maximum Building Footprint.

The percentages of the Total Lot Area (TLA) used to determine the Allowable Maximum TGFA.

ISA is considered an open space and may be combined with Unpaved Surface Area (USA) to meet total open space requirements.

PSO + TOSL = 100%.

Rule VII and VIII of the IRR of the NBCP.

Systems and equipment installations must comply with the Philippine Mechanical Engineering Code.

At the link: https://united-architects.org/assets/files/media-files/Architectural%20Code.pdf

It defines the required open space within a lot.

They provide information on setbacks, yards, and courts.

In Rule VIII Table VIII.1.

It provides guidelines for sustainable and organized urban development.

Patios, grade level terraces, driveways, walks, parking areas, and similar built-up areas.

It indicates that paved surfaces do not allow water percolation into the soil and do not allow the soil to breathe.

Unpaved Surface Area.

Local government units and the National Building Code of the Philippines.

PSO = (AMBF in sq.m.) / (Total Lot Area in sq.m.)

The National Building Code and local government units.

TGFA limitation and its calculation based on Total Lot Area (TLA).

Local government units and relevant national agencies.

It provides guidelines that influence land use and building density.

Allowable Maximum Building Footprint.

There must be at least one entrance and one exit.

AMBF = min(AMBF 1, AMBF 2).

To establish standards and guidelines for architectural practice in the Philippines.

The prescribed FLAR multiplied by the Total Lot Area (TLA).

Compliance with safety, health, and environmental standards.

Provisions for courts at grade level.

Total Open Space within Lot.

At least 120 kg per sq.m. for vertical projections.

The ratio between the Gross Floor Area (GFA) of a building and the Total Lot Area (TLA) of the property.

Total Gross Floor Area.

Safety, health, and welfare of the public in building design and construction.

To establish standards and guidelines for architectural practices in the Philippines.

The portion of the lot that remains unpaved and is reserved for softscaping or planting.

Percentage of Site Occupancy.

Floor to Lot Area Ratio.

It provides guidelines for land use and building development.

Footings must be at least 250 mm thick and 600 mm below the surface, sufficient to support the load.

Yes, to satisfy the Total Open Space within Lot (TOSL) requirements.

Total Open Space within Lot.

It regulates the design, construction, and occupancy of buildings.

A set of interacting regulations concerning the physical utilization of a lot and the planning/design of spaces or the use/occupancy of a building/structure.

Maximum Allowable Construction Area.

Section 803.4.

At least 200 kg per sq.m.

Impervious Surface Area.

Building Height Limit.